ELM-150W-12V - LED Dimmable Driver C.V. for LED Flexible Ribbon Strips

ELM-150W-12V - LED Dimmable Driver C.V. for LED Flexible Ribbon Strips
Item# ELM-150W-12V
$225.00

Product Description


Specifications:

Dimensions: Length:9 3/4", Width: 3", Depth: 2 7/8"
Max Load: 150W
Weight: 6 lbs.
Input Voltage: 120V 60Hz
Output Voltage Full Load: 11.5VDC
Input Current Full Load: 1.27mA
Open Circuit Volts: 12.5VDC
Output Current Full Load: 12.5A
Efficiency: 91.50%
Coil Former: Double section Bobbin
Thermal Class: B 130C
Leads Primary: PVC 600V 20#
Leads Secondary: PVC 300V 12#

Introducing our new ETL listed 150 watt 12 volt LED Dimmable Transformer for Flexible Ribbons. The actual transformer is encapsulated in the enclosure. The input leads are 20 AWG and output leads are 16 AWG. Lead insulation is 105C. The LED Driver uses a class B 130C insulation system.

Enclosure:
Enclosure temperature does not exceed 70C at 40C ambient. Wiring compartment has 2 knockouts sized for 3/4 inch screw cable connectors. The removable cover for the wiring compartment is secured in place by screw. The enclosure is black powder coated.

General Information:
The transformer has a manual reset thermal circuit breaker on the secondary side. This unit can be controlled with a low-voltage dimmer and it is ETL listed.